The Converter have been tested and found to comply with the limits for a class A didtal device,pursuant to part 15 of the FCC Rules.these standards are designed to provide reasonable protection against harmful interference when these devices are operated in a commercial environment.these devices can use, generate and radiate radio frequency energy and may cause harmful interface to radio communications unless installed in accordance with User? Guide.Operation of this device in a resifential area is likely to cause harmful interface which will make the user responsible for the appropriate remedial action at this/her own expanse.

These are class A products In a domestic environment these products may cause radio interface in which cause the user will need to consider adequate preventative menasures.
Technical parameter
1.Standards:IEEE802.3u Fast Ethernet 10/100Base-TX and 100Base-FX
2.Connectors:(RJ45-UTP and Fiber SC)
3.LED:Power.FDX/Col,FX-Link/Act,TXLink/Act,FX100.TX100
4.Data Tranfer Mode: 10/100Mbps
5.Duplex Mode :Full or Half Duplex Mode
6.Power requirement:AC 100-260V DC1A@+5V
7.Ambient temperature:0~70℃
8.Humidity:5% - 90%(noncondensing)
9.Cable:Cat.5 UTP cable
10.Fiber: Multi-mode
11.Size: 94mm*70mm*26mm (L*W*H)
Specification
Connector Type: SC
Typical Distance: 60Km
Fiber Type: singlemode
Wavelength: 1310nm
Min TX PWR: -5.0dBm
Max TX PWR: -1.0dBm
Sensitivity: -35.0dBm
Link Budget: 29.0dBm